AE  2105 放大器

品牌：AE Techron
型号：2105

Electric Field Susceptibility 
单相2U梯度放大器

Performance
Specification typical at 25°C ambient. Unless otherwise noted; 
testing was done in Current mode with a load = 500 μH +100 mΩ
Peak Current Limit: 55A
Gain (adjustable), 
   Voltage Mode: 20 to 0.2 V/V μV (0.95 mV)
   Current Mode: 5 to 0.2 
Gain Linearity (over input signal, from 0.2V to 5V), 
   DC: 0.02%
   AC: 0.05%
Output Offset (adjustable to zero), 
   Voltage Mode: Less than ±400 μV
   Current Mode: ±5 mA
Output Impedance, 
   Current Mode (effective): 2000Ω
   Voltage Mode (typical): 28 mΩ in series with 1 μH
Load, 
   Current Mode: 500 μH + 100 μΩ
   Adaptable Range: 5 μH to 1.5 H, 0.01Ω to 20Ω
Current Mode Respoe: ?3 dB at 5 kHz (compensation dependent)
Current Settling Time, Ramp 0A to ±50A or ±50A to 0A, 
   20 μs: To within 1.0A or
   35 μs: To within 200 mA or 0.2%
Total Harmonic Distortion, 
   Current Mode: Less than 0.1%
   Load: 500 μH + 100 mΩ
Noise Floor (when Blanking circuit is enabled): 4 μA or less
DC Drift, Self Heating Drift, 0 to ±60A: 5 mA/10 minute, maximum
Noise Output, 
   10 Hz to 1 kHz: 0.2 mA
   1 kHz to 60 kHz: 0.05 mA
Ripple Noise Output: none 
Slew Rate, Voltage Mode: 23 V/μs