产品 产品信息
02 04 2023

福建莆田全自动挂历单/双线圈装订机 厂家电话价格报价  台历装订机  挂历装订机  日历装订机

当前位置: 首页> 纸业、印刷、包装> 印后加工设备> 装订机
来源:[东莞市恒博装订设备有限公司]
联系人:张先生
手机:13564396415
电话:0371-88254679
传真:0731-88254679
QQ:2376002172
Email:afantychn@163.com
地址:广东省东莞市长沙市厚街镇沙塘村德朗智慧工厂10号厂房
品牌:AFT
价格:8999.00 元/
供应地:湖南省长沙市
产品型号:AFT-520

 福建省 漳州市  泉州市  厦门市  福州市  莆田市  宁德市  三明市  南平市  龙岩市
全自动台历 挂历 笔记本单/双线圈装订机可能出现的异常、故障及排除方法 Trouble shooting
HB-400PBF-自动铁单线圈打孔.成型.装订一体机6

8.1 冲孔系统故障排除 Punching system trouble shooting

   8.1.1   故障现象:全自动台历 挂历 笔记本单/双线圈装订机机器不动 Symptom: The machine does not move

           产生原因:电源没有接通或者保护开关触发异常。

Cause: The power supply is not turned on or the protection switch is triggered
  排除方法:查看电源开关是否已经接通,保护开关有无异常, 配电箱内空气开关是否断开。

Remedy: Check whether the power switch is switched on, whether the protection switch is abnormal or not, and the air switch in the distribution box is disconnected
8.1.2异常现象:全自动台历 挂历 笔记本单/双线圈装订机毛边大

Abnormal phenomenon: big hair
  产生原因:纸张太厚,冲针严重磨损

Cause: The paper is too thick and the punch is severely worn
  排除方法:正常运行纸张厚度建议在1-6mm之内;如果是冲针磨损严重请更换。Remedy: normal operation of the paper thickness is recommended within 1-6mm; if the pins wear, please replace.

8.2 全自动台历 挂历 笔记本单/双线圈装订机机器手送料系统的故障排除 The feed belt system trouble shooting

   8.2.1 故障现象:全自动台历 挂历 笔记本单/双线圈装订机机器不动Symptom: The machine does not move

         产生原因:电源没有接通或者光电开关触发异常。Cause: The power supply is not turned on or the photoelectric switch triggers an abnormality
         排除方法:查看电源开关是否已经接通,光电开关有无异常。Remedy: Check whether the power switch is turned on, the photoelectric switch is abnormal.

   8.2.2  异常现象:全自动台历 挂历 笔记本单/双线圈装订机机械手抓取和送料位置不对             Abnormal phenomenon: the robot grab and feeding POSTTTION is wrong

   产生原因:皮带拉长松弛或者是皮带固定块1不牢靠。        Cause: The belt is stretched or the belt is fixed
04-2

   排除方法:将皮带张紧到合适的松紧度,调整好机械手的位置锁紧皮带固定块。Remedy: Tighten the belt to the appropriate tightness, adjust the POSTTTION of the robot to lock the belt fixed block.



电话咨询获取底价