一、橡胶止水带性能特点
I. performance characteristics of rubber sealing strip
橡胶止水带广泛应用于各种类型的混凝土结构中，例如：挡水坝、蓄水池、地铁、涵洞、隧道等地下工程中。在这些工程中，由于不能连续浇铸，或由于地基的变形，或由于温度变化引起的混凝土构件的热胀冷缩等原因，在浇铸时常留有变形缝、施工缝，这些缝的防渗漏问题就要采用在变形缝的部位浇铸橡胶止水带的方法来解决，它既能防止地下水或外界水渗漏到建筑物结构中，橡胶止水带又可防止建筑内的水漏到外界。
Rubber sealing strip is widely used in various types of concrete structures, such as dam, reservoir, subway, culvert, tunnel and other underground works. In these projects, due to the continuous casting, or as a result of the ground deformation, or caused by temperature change of concrete thermal expansion and contraction, often left in the casting deformation joints, construction joints, these joints leakage problems must be adopted in the method of deformation of the casting parts of the rubber sealing belt to solve and it can prevent the water leakage of groundwater or external to the building structure, the rubber sealing strip can prevent water leakage to the outside the building.
二、橡胶止水带技术标准
Two. Rubber tape standard
1． 我公司生产的橡胶止水带是组织生产的，尺寸公差一律按国家标准执行，如用户有特殊要求，可按用户要求制造。
1., our company produces rubber waterproof belt is the production of the organization, size tolerances are in accordance with national standards, such as the user has special requirements, can be manufactured according to user requirements.

2． 橡胶止水带型号以分类别分类编号，以方便设计参考和用户定货。

2. rubber stop belt model is classified, classified and numbered to facilitate design reference and user order.
3． 我公司可按用户要求生产各种形状、尺寸的橡胶止水带，另外还可为不同工程、不同部位的需要备有十字型、丁字型、斜度型和内外转角型产品，可适用于任何设计要求。
3. my company can according to the production of various shapes and sizes of rubber sealing requirements of users also need, for different parts of the project, a cross shaped, inclination angle and internal and external products, can be applied to any design requirements.
4． 橡胶止水带在运输时，应要避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所最好保持-10-+30，相对湿度40%-80%。
4. rubber sealing strip during transportation, should avoid direct sunlight, do not contact with heat, oil and harmful solvent. The finished product should be taken straight and flat, without heavy pressure. Storage place is best to keep -10-+30, relative humidity 40%-80%.
三、橡胶止水带施工方法：
Three 、 rubber water stop construction method:
橡胶止水带是在混凝土浇铸过程中部分或全部浇埋进混凝土中。
The rubber sealing strip is partially or wholly poured into concrete during the concrete casting process.
橡胶止水带在浇埋混凝土以前先要使其在界面部位保持平展，再以适当的力充分浇捣、震荡混凝土来定位橡胶止水带，使其与混凝土良好的结合，以免影响止水效果。

The rubber sealing belt before pouring concrete buried first kept flat on the interface part, then the appropriate force fully cast, shock concrete to locate the rubber sealing strip, the combination of concrete and good sealing effect, so as not to affect the.

四、橡胶止水带施工注意事项：
Four, rubber sealing tape construction notice:
1、 止水带在施工过程中，由于混凝土中有许多尖角的石子和锐刃的钢筋，所以在浇捣和定位橡胶止水带时，应注意浇捣的冲击力，以免由于力量过大而刺破橡胶止水带。如有发现有破裂现象应及时修补，否则在接缝变形和受水压时，橡胶止水带所能抵抗外力的能力就会大幅度将会大幅度降低。
1, stop in the construction process, because there are many sharp stones and reinforced concrete in the sharp edge, so in the pouring and POSTTTIONing of the rubber sealing belt, should pay attention to the impact of force pouring, so as to avoid the excess force piercing the rubber sealing belt. If it is found that there is a rupture, it should be repaired in time, otherwise, when the joint deformation and water pressure, the ability of the rubber waterproof belt to resist external force will be greatly reduced.
2、 在地位橡胶止水带时，一定要使其在界面部位保持平展，更不能让橡胶止水带翻滚、扭结，如发现有扭转展现象应及时进行调正。
2, in the status of rubber water stop, must make it at the interface to maintain flat, and can not let rubber water belt rolling, kink, if found to have twisted, show the image should be timely adjustment.