产品 产品信息
10 10 2016

苏州Bayblend 高耐热性T90HT

当前位置: 首页> 石油、化工> 树脂用原料> 其他树脂原料
来源:[东莞市大田化工有限公司]
联系人：赵先生
手机：13662889445
电话：0769-84393119
传真：0769-84393119
QQ：286928167
Email：1423969852@qq.com
地址：广东省东莞市东莞市常平司马管理区洲寮新街二十三号
品牌：Bayblend
价格：面议 元/KG
供应地：广东省东莞市
产品型号：T90HT

Bayblend T90HT
PC/ABS
良好的流动性，高耐热性

未增强注塑级，高耐热性，维卡/乙120 =  135°C，球缩进温度> = 125°C;易流动，适合作为支撑带电部件的材料。

[Datasheet Bayblend T90 HT]

Property Test Condition Unit Standard typical Value
Rheological properties
campus image Melt volume-flow rate 260 °C; 5 kg cm3/10 min ISO 1133 26
  Molding shrinkage, parallel 150x105x3 mm; 260 °C / MT 80 °C % b.o. ISO 2577 0.6 - 0.8
  Molding shrinkage, normal 150x105x3 mm; 260 °C / MT 80 °C % b.o. ISO 2577 0.6 - 0.8
  Melt viscosity 1000 s-1; 260 °C Pa·s b.o. ISO 11443-A 250
Mechanical properties (23 °C/50 % r. h.)
campus image Tensile modulus 1 mm/min MPa ISO 527-1,-2 2400
campus image Yield stress 50 mm/min MPa ISO 527-1,-2 56
campus image Yield strain 50 mm/min % ISO 527-1,-2 5.0
  Stress at break 50 mm/min MPa ISO 527-1,-2 48
  Strain at break 50 mm/min % b.o. ISO 527-1,-2 > 50
  Izod impact strength 23 °C kJ/m2 ISO 180-U N
  Izod impact strength -30 °C kJ/m2 ISO 180-U N
  Izod notched impact strength 23 °C kJ/m2 ISO 180-A 44
  Izod notched impact strength -20 °C kJ/m2 ISO 180-A 21
Thermal properties
campus image Temperature of deflection under load 1.80 MPa °C ISO 75-1,-2 110
campus image Temperature of deflection under load 0.45 MPa °C ISO 75-1,-2 129
campus image Vicat softening temperature 50 N; 50 °C/h °C ISO 306 133
  Vicat softening temperature 50 N; 120 °C/h °C ISO 306 135
campus image Burning behavior UL 94 (1.5 mm) 1.5 mm Class UL 94 HB (Bayer internal)
Electrical properties (23 °C/50 % r. h.)
campus image Relative permittivity 100 Hz - IEC 60250 3.1
campus image Relative permittivity 1 MHz - IEC 60250 2.9
campus image Dissipation factor 100 Hz 10-4 IEC 60250 15
campus image Dissipation factor 1 MHz 10-4 IEC 60250 90
campus image Volume resistivity   Ohm·m IEC 60093 1E14
campus image Surface resistivity   Ohm IEC 60093 1E17
campus image Electrical strength 1 mm kV/mm IEC 60243-1 35
Other properties (23 °C)
campus image Water absorption (saturation value) Water at 23 °C % ISO 62 0.7
campus image Water absorption (equilibrium value) 23 °C; 50 % r. h. % ISO 62 0.2
Processing conditions for test specimens
campus image Injection molding-Melt temperature   °C ISO 294 260
campus image Injection molding-Mold temperature   °C ISO 294 80
campus image Injection molding-Injection velocity   mm/s ISO 294 240

Disclaimer

电话咨询获取底价