我们的SK钉扣机以非常高的性价比赢得了广大客户的一致好评！
SK皮带扣是适用于皮带厚度6-16mm输送带的联结
抗拉强度大、耐磨损、使用寿命长非常多的优点！！
钉扣质量好：钉扣时可将输送带三点定位后采用交叉次序钉扣，使输送带的挤压变形均匀分布，保证钉扣后接头

的直线度；不受输送带厚度变化的影响，每个带扣均可钉实。
操作方便：输送带可方便地装入钉扣机上的带扣内，从而大大的节省钉扣辅助工时，可钉扣操作要领容易掌握，

能保证操作质量，对操作现场环境要求低。
使用寿命长：钉扣机关键零件用特种钢材制成，结实可靠。
Tensile strength, wear resistance, long service life of many advantages! Good quality of 

fastening: When fastening, the conveyor belt can be fixed at three points and then the cross-order 

fastening can be used to make the extrusion deformation of the conveyor belt evenly distributed to 

ensure the straightness of the joint after fastening Easy to operate: the Conveyor Belt can be 

conveniently put into the belt buckle on the nail buckle machine, thus greatly saving the nail 

buckle auxiliary labor time, can nail buckle operation essentials easy to grasp, can ensure the 

operation quality, to operate the site environment requirements. Long Service Life: Nail Button 

machine key parts made of special steel, solid and reliable.
SK锤打式钉扣机技术参数：
规格适用带厚（mm)适用胶带强度滚筒较小直径
SK四针 6-9      ≤1200KN/mmΦ250mm
SK四针10-12
SK六针 6-9         ≤1400KN/mm
SK六针 0-12
SK六针13-15
SK锤式皮带钉扣机特点：
（1）轻便易携；
（2）订扣机所有零部件标准化生产，皆可互换，易于维护修理；（3）交错装订、接头不变形；
（4）锤式装订，在皮带磨损厚度不一的情况下，依然能保证带扣个个装订牢靠。
SK Hammer type belt nail buckle machine features: (1) portable; (2) all parts of the buckle 

machine standardized production, are interchangeable, easy to maintain and repair; (3) staggered 

binding, joints do not deformation; (4) Hammer binding, in the case of belt wear thickness is not 

the same, and still make sure the buckles are securely stapled.
选我们没有错哦！
当我们拿花送给别人的时候，首先闻到花香的是自己;
当我们抓起泥巴抛向别人的时候，首先弄脏的也是自己的手;?
与其用泪水悔恨今天，不如用汗水拼搏今天。

联系人：陈经理
地址：山东省济宁市任城区金宇路4号
手机：13165175381