手动皮带切割机用途
用于输送带横向端边切割。使用GT系列输送带切割机切割输送带，可使操作轻便、快捷，并且切割端边

平整，与带边垂直。有利于带扣装订后扣带距离均匀，接头与带边垂直，减少输送带运行中的跑偏的因

素。


Manual belt cutting machine is used for cutting the transverse end of conveyor belt. GT 

series conveyor belt cutting machine cutting conveyor belt, can make the operation easy and 

fast, and cutting end flat, and vertical with the belt edge. The utility model is 

advantageous to the uniform distance of the buckle after the buckle is bound, the joint is 

perpendicular to the belt edge, and the factors of the running deviation of the conveyor 

belt are reduced.

手动皮带切割机规格：650mm、800mm、1000mm、1200mm、1400mm，1600mm、1800mm等，您的输送带多宽

您就买多大的。
皮带切割机主要适用25公分以内的皮带，25公分以上32公分以下的皮带需要定制刀片
直角割皮机能够保证输送带的对接垂直，不会出现接完输送带跑偏的现象。  
Belt cutting machine is mainly suitable for belt within 25 cm, 25 cm above 32 cm below the 

belt needs custom blade right angle cutting machine can guarantee the belt docking 

vertical, there will not be finished conveyor belt misalignment phenomenon.

联系人：陈经理
地址：山东省济宁市任城区金宇路4号
手机：13165175381