?Hide technical details
              TypesDry (SMT16B) or submerged (SMIT16B)
              Models20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80 - 90 - 110 - 125
              - 150 - 180
              InstallationFree for SMT16B. Submerged (totally or partially) for
              SMIT16B - Foot mounted for model 125 and up.
              FlangesISO 3019/2
              ConnectionsSAE 3000 - BSPP
              Drive loadingNo axial or radial loads
              Shaft rotationClockwise (from shaft end) , (suitable also for
              counter clockwise rotation)
              FlowsFrom 4 up to 3.200 L/min (for model 20 to 110) - From 1.700
              up to 4.900 L/min (for model 125 and up)
              Outlet PressureUp to 40 bar
              Inlet PressureMin. -0.7 bar max. 3 bar(2)
              Fluids(3)? Ecologic fluids HETG, HEPG, HEE
              ? Synthetic fluid or emulsion: HFA oil-water emulsion, HFB
              water-oil emulsion 40% of volume, HFC water/ glycole – water max
              35 to 55%, HFDR phosphate ester
              ? Lubrication high viscosity oils
              ? Special synthetic fluid: MIL-H, SKYDROL,
              ? Fuel oil: MGO, MDO, Low sulfur MDO and HFO
              ? DMX (ISO8217), DMA, DMB, DMC, DMZ
              ? Bunker oil, furnace oil, engines oil, heating oil, hydraulics
              oils DIN 51524
              ViscosityFrom 2 up to 10.000 cSt(4)
              Seals polymer (shaft, O-ring)NBR, FKM, EPDM (5)
              Seal typeTM, TMK, TMZ, FGM
              Acoustic EmissionsFrom 52 up to 68 db(A) at 2.950 rpm value based
              on ISO 4412 test procedure
              Pump BodyAluminum alloy
              Pump body (special applications)
              Cast iron, steel. Hardened steel and stainless steel available on
              request

              ScrewsSteel for main screw , idler cast iron
              Screws (special applications)Core hardened steel screws, surface
              treated screws
              Environment TemperatureFrom - 50 ° up to + 100°C (6)
              Hydraulic TemperatureFrom - 50° C up to + 300° C (6)
              FiltrationPermissible degree of fluid contamination NAS to 1638
              class 10 or ISO DIS 4406 – 19/16. Recommended filtration ? 25 ≥ 75
        (1)For shaft speed lower than 1.000 rpm and over 1.800 rpm please
        contact Settima.
        (2)For higher pressure please contact Settima.
        (3)For request of different fluids please contact Settima.
        (4)For level of viscosity lower than 20 cSt and over 320 cSt please
        contact Settima.
        (5)For special seals please contact Settima.
        (6)For higher/lower temperature please contact Settima.
        产品应用工业

        船舶

        过滤

        冷却

        润滑

        压机

        油气

        发电

        机床

        风车

        产品优势粘度低

        脏流体

        流动性高

        燃油

        无噪音