Air Motors, Series P1V-A
P1V-A is a range of reversible air motors intended for heavy and
demanding applications. The motor housings are made from
painted cast iron, and the components sealed to permit operation
in damp and dirty environments.
The range contains three different sizes, P1V-A160, P1V-A260
and P1V-A360, with power ratings of 1600, 2600 or 3600 Watts.
The basic motors can be supplied with built-in gearboxes, either
planetary, helical or worm drive, to provide the correct speed of
rotation and torque, and the correct installation mountings.
Basic motor
standard, which gives the motors very good starting and low
speed running characteristics. They are also equipped with
vanes for intermittent lube-free operation as standard. 100%
struction of the motors makes them very reliable, with long service
life and they are easy to service.
Motors with planetary gears
A P1V-A combined with a planetary gear has small installation
dimensions, low weight in relation to performance, free installation
POSTTTION, flange mounting as standard, in line output shaft
and high efficiency. They are available with shaft speeds ranging
from 95 rpm to 1200 rpm, with torques ranging from 16 Nm
to 160 Nm.
Motors with helical gears
A P1V-A combined with a helical gear has high efficiency, simple
installation with flange or foot, and competitive pricing. They
are available with shaft speeds ranging from 25 rpm to 1050
rpm, with torques ranging from 23 Nm to 1800 Nm. Oil-bath
gears mean that the installation POSTTTION must be decided beforehand.
The installation POSTTTION governs the amount of oil in
the gear and the LOCAIION of filling and drain plugs.
Motors with worm gears
A P1V-A combined with a worm drive gear has the following
characteristics: gearboxes with high gear ratios are self-locking,
which means that they can be used to maintain the output shaft
in POSTTTION, simple installation with the flange on the left or right
sides or with a foot, small installation dimensions and competitive
pricing. They are available with shaft speeds ranging from
62 rpm to 500 rpm, with torques ranging from 38 Nm to 670 Nm.
Oil-bath gears mean that the installation POSTTTION must be decided
beforehand. The installation POSTTTION governs the amount
of oil in the gear and the LOCAIION of filling and drain plugs.