Lead glass is mostly used in the radiology department of hospitals to protect against radiation. For hospitals, the advent of medical lead glass is particularly important. Therefore, in ordinary times, often to lead glass cleaning, because with ordinary glass is not the same, so in cleaning can not be cleaned according to the general method of cleaning glass. Following the lead glass manufacturers to introduce the lead glass cleaning matters needing attention:

　　铅玻璃的清洗一般都会使用强酸氧化剂洗液.强酸氧化剂洗液是用重铬酸甲和浓硫酸配成.K2Cr2O7在酸性溶液中,有很强的氧化能力,对玻璃仪器又及少有侵蚀作用.所以这种洗液在铅玻璃的清洁中使用比较广泛.这类洗液在使用时要切实注意不能溅到身上,以防"烧"破衣服和损伤皮肤.洗液倒入要洗的仪器中,应使仪器周壁全浸洗后稍停一会再倒回洗液瓶.第一次用少量水冲洗刚浸洗过的仪器后,废水不要倒在水池里和下水道里,长久会腐蚀水池和下水道,应倒在废液缸中,集中处理.

　　The cleaning lead glass will generally use strong oxidant lotion. Acid oxidant lotion is with potassium dichromate and concentrated sulfuric acid with.K2Cr2O7 in acidic solution, has strong oxidation ability, less corrosion of the glass instrument again. So this kind of lotion in the lead glass cleaning is widely used. This kind of the lotion is in use to pay attention not to splash on, to prevent the "burn" rags and damage the skin. Wash lotion in the instrument, the instrument should be Biquan week after a pause for a while and then fell back washing lotion bottle. For the first time with a small amount of water washing equipment just after washing wastewater, do not pour in the pool and in the sewers, water and sewer corrosion will for a long time, should be poured in the waste water tank, centralized treatment.

　　在清洗铅玻璃时还可能用到碱性洗液.碱性洗液用于洗涤有油污物的铅玻璃,从碱洗液中捞取铅玻璃时,要戴乳胶手套,以免烧伤皮肤.In the cleaning of lead glass may also use alkaline lotion. The alkaline lotion used for washing the lead glass oil dirt, from their lead glass alkali solution, to wear latex gloves, so as not to burn the skin.

公司主要生产铅板（医用铅板、防辐射铅板、X光室防护铅板）铅砖、铅锭、铅玻璃、硫酸钡.硫酸钡板、医用铅门、防辐射铅门、CT、X光室防辐射铅门、铅房、铅屏风、工业探伤门（直线加速器、工业加速器、工业CT、X射线、钴60治疗机）复合防护板及其它铅制品的生产厂家，生产的铅制品全部用99.994以上的铅锭制造，主要用于医院防护，工业探伤，工业防腐。公司是经卫生部疾控中心颁发资质，专业从事射线防护施工和材料生产销售的企业，主要销售国产铅玻璃、铅板、防辐射铅板、医用铅板、铅皮、铅砖、硫酸钡、防辐射涂料、铅门、铅屏风、铅胶皮等，拥有专业的施工队伍,专业生产医用射线防护门,防护窗,并对CT室,X光室，ECT,核医学等操作间进行专业施工。铅板，指用金属铅轧制而成的板材，比重为11.345g/cm3 目前国内常见的厚度为1-20mm，常用规格为1000*2000MM，最长8000MM，国内最好的机器可制作最宽1500MM，最长30000MM，多采用1#电解铅制作，市面上也有采用回收铅制作而成的。

　　It is one of the most important raw materials in radiation protection, so it is needed in the construction after the completion of the maintenance? We should pay attention to those aspects?

　　1、保护措施应能够使人警觉有铅板存在,又能阻挡人体对铅玻璃猛烈的冲击,同时又起到了装饰作用,并且随着铅板透光尺寸逐渐变大,保护设施应能承受的集中冲击力也要随之增强.

　　1, protective measures should be able to make people aware of it there exists, can prevent the impact of human lead glass violent, also played a decorative role, and with the lead light size becomes large, centralized protection facilities should be able to withstand the impact force also increases.

　　2、防止由于人体冲击铅板玻璃而造成的伤害,最根本最有效的方法是避免人体对铅玻璃的冲击.在铅板上作出醒目的标志以表明它的存在,或使人不易靠近铅玻璃,就可以从一定程度上达列这种目的.

　　2, to prevent due to human impact lead glass damage, the fundamental method is the most effective to avoid the impact of human lead glass. Make eye-catching signs in it to indicate its existence, or make people not easily close to the lead glass, it can be to some extent darie this purpose.

　　3、保护设施个不得存在断裂和冲击造成的弯曲,不得松动、摇摆,当不能满足要求寸应及寸更换或维修.

　　3, protection facilities shall not exist fracture and impact caused by bending, not allowed to loose, swing, when not meet the requirements inch inch and inch replacement or maintenance

　　4、在铅板单侧或双侧应设置护栏或摆放放花盐等装饰,并且保护正面宽度不宜太小、太窄.竖直保护应对准铅玻璃中心,水平保护应位于最高临近地板以上800至1100mm的区域内.

　　4, it should be set in unilateral or bilateral fence or placed flowers salt and other decorations, and protect the front width is too small, too narrow. The vertical protection should be the lead glass center, the level of protection should be located at the highest floor near more than 800 to 1100mm in the region.