Lead glass is mostly used in the radiology department of hospitals to protect against radiation. For hospitals, the advent of medical lead glass is particularly important. Therefore, in ordinary times, often to lead glass cleaning, because with ordinary glass is not the same, so in cleaning can not be cleaned according to the general method of cleaning glass. Following the lead glass manufacturers to introduce the lead glass cleaning matters needing attention:

　　铅玻璃的清洗一般都会使用强酸氧化剂洗液.强酸氧化剂洗液是用重铬酸甲和浓硫酸配成.K2Cr2O7在酸性溶液中,有很强的氧化能力,对玻璃仪器又及少有侵蚀作用.所以这种洗液在铅玻璃的清洁中使用比较广泛.这类洗液在使用时要切实注意不能溅到身上,以防"烧"破衣服和损伤皮肤.洗液倒入要洗的仪器中,应使仪器周壁全浸洗后稍停一会再倒回洗液瓶.第一次用少量水冲洗刚浸洗过的仪器后,废水不要倒在水池里和下水道里,长久会腐蚀水池和下水道,应倒在废液缸中,集中处理.

　　The cleaning lead glass will generally use strong oxidant lotion. Acid oxidant lotion is with potassium dichromate and concentrated sulfuric acid with.K2Cr2O7 in acidic solution, has strong oxidation ability, less corrosion of the glass instrument again. So this kind of lotion in the lead glass cleaning is widely used. This kind of the lotion is in use to pay attention not to splash on, to prevent the "burn" rags and damage the skin. Wash lotion in the instrument, the instrument should be Biquan week after a pause for a while and then fell back washing lotion bottle. For the first time with a small amount of water washing equipment just after washing wastewater, do not pour in the pool and in the sewers, water and sewer corrosion will for a long time, should be poured in the waste water tank, centralized treatment.

　　在清洗铅玻璃时还可能用到碱性洗液.碱性洗液用于洗涤有油污物的铅玻璃,从碱洗液中捞取铅玻璃时,要戴乳胶手套,以免烧伤皮肤.In the cleaning of lead glass may also use alkaline lotion. The alkaline lotion used for washing the lead glass oil dirt, from their lead glass alkali solution, to wear latex gloves, so as not to burn the skin.

华东区域 ：156-5318-5858(孙经理) （微信）
                  电话：0635-6588566（办公室）

　　一般地说，从铅门的形象及便利自动门今后保、养修理的视点思考，最佳选用不锈钢、铝型材或铝塑板作为门柱、门粱的外饰面;若是选用大理石作为外饰面，铅门工程与大理石工程之间必需事前断定相互合作的施工计划，否则会形成严峻的结果。而门体制造一般采玻璃为主(医院在外)。

　　当前常见的铅门有纯玻璃门及有框玻璃门。纯玻璃门的制造本钱较低，通透性较好;有框玻璃门的制造本钱较高，显得慎重、大气，安全可靠。所以，当门洞较小时，一般选用纯玻璃门方法，当门洞较大时，一般选用有框玻璃门方法。

现在医用气密门现用于放疗机房，ct，x线机房及工业探伤机房墙体防护，提供施工技术指导。

　　医用气密门的操作：X光室或普通牙科诊室-如果只是做墙体和地板的防护，建议用硫酸钡砂，硫酸钡砂和水泥按4:1的比例(4份硫酸钡 1份水泥)混合涂抹在墙体或地板上，医用气密门的厚度，墙体一般只需要15mm就可以，地板20mm。用铅板防护也可以(1--2mm厚度即可)铅防护门：铅当量达到3当量即可，观察窗：铅玻璃厚度达到15mm即可。

　　CT室、探伤室--墙体必须要用医用气密门做防辐射阻断，地板可以用硫酸钡 水泥按4:1的比例涂抹40mm。铅防护门：铅当量必须达到4-5当量。观察窗：铅玻璃厚度必须达到20mm。凡在本公司购买的产品以最短的时间到达你的手中!确保每一位用户都可以买得称心、用得放心!你把订单交给我，我把满意留给你”，多年来，公司在在销售、加工、配送过程中供货及时，质量可靠，售后服务完善、周到。我们热忱欢迎社会各界有识之士来电来函洽谈业务。