无锡耐火材料 电厂废水净化聚丙烯酰胺pam吧  15838356978
使用聚丙烯酰胺经验之谈

聚丙烯酰胺在被作为净水絮凝剂使用时，必须充分搅拌溶解后才能继续投加使用。否则不能发挥其应有的絮凝作用。溶解时搅拌速度控制在400~000/min为宜，时间约1小时。
为了混合均匀，应该使用最稀浓度。溶液存放时间不适宜超过10个小时，同时也不能与铁器接触，溶解水温不能超过60度，否lation dry powder, light resistant glass fiber reinforced plastic.
2, building materials, building decoration, high-grade pavement materials, roof waterproof thermal insulation coating, road engineering, modified asphalt, etc.
3, the oil industry, oil well cementing, pipeline anticorrosion insulation, sea oil field, floating device, the well drilling mud reducing agent, oil and gas pipelines, etc.
4, insulation materials, plastic activation fillers, insulation of high temperature and high pressure, etc.
5, coating industry, paint, printing ink, adhesives, stealth coatings, insulating paint, anti-corrosion paint, floor paint, high temperature resistant fire retardant paint, exterior paint, insulation paint, floor paint, auto putty, putty, etc.
Development: 6, space and space satellite, rocket, the spacecraft surface composites, satellite fire protection layer, Marine equipment, vessels, deep-sea submarines.
7, the plastics industry, such as automotive trim, instrument panel, home appliance shell, fan, speakers, lamps and lanterns is always bearing, casting, gear, st

若是自来水厂使用的话，为使得净化出水中丙烯酰胺单体含量不超过卫生标准，必须采用高聚合度的聚丙烯酰胺产品作为饮水用的净水絮凝剂。
与需要处理的无聊有足够长的时间来混合，并且输送PAM溶液时，要尽量减少管路损失。
在实际使用时，要根据实际情况来决定，可以在上机前先做一系列的小试，以便知道在正式操作时的用量和各种注意事项。
8